jb JNE 2000H at 105C Snap in Aluminum Electrolytic Capacitor

jb Capacitors mainly produce film and aluminum electrolytic capacitors. The following Snap in Type Aluminum Electrolytic Capacitors are the one you may be interested in.

If you are interested, we could send you the datasheets and price list of the spec. that you require. Free samples could also be arranged to you for testing

JNE - 2000H at 105C Snap-in Aluminum Electrolytic Capacitor
Its features are listed below:
Load life of 2000 hours at 105°C
High ripple current
Smaller size
PCB Mounting
Operating Temperature Range: -40C~+105C (16V~100V); -25C~+105C(160V~600V) 
Capacitance Tolerance (25C, 120Hz) ±20% 
Leakage Current (uA) 0.01CV or 1.5mA whichever is smaller. (25C, after 5 minutes)

jb share you the construction of a ceramic capacitor and the benefits for using multilayer ceramic capacitor

ceramic capacitor is a fixed-value capacitor where the ceramic material acts as the dielectric. It is constructed of two or more alternating layers of ceramic and a metal layer acting as the electrodes.
The composition of the ceramic material defines the electrical behavior and therefore applications.

What are the benefits for using multilayer ceramic capacitor? One of the advantages is that multilayer ceramic capacitors have excellent frequency characteristics, thanks to their low equivalent series resistance (ESR). The term “ESR” refers to the resistance component of a capacitor’s internal electrodes, etc.

jb share you the construction of a ceramic capacitor and the benefits for using multilayer ceramic capacitor

jb tell you how Multilayer ceramic capacitors (MLCCs) are made

Multilayer ceramic capacitors (MLCCs) are generally the capacitor of choice for applications where small-value capacitances are needed. They are used as bypass capacitors, in op-amp circuits, filters, and more.
How are multilayer ceramic capacitors made? A multilayer ceramic capacitor is completed as a chip, mainly through the following eight forming processes.

Processes:
Printing of the internal electrodes on the dielectric sheet.
Stacking of the dielectric sheets.
Pressing process.
Cutting process.
Sintering process
Applying and baking the outer electrodes.
Plating process.

jb tell you how Multilayer ceramic capacitors (MLCCs) are made

jb JYT series SMD Ceramic Chip Capacitors (High Voltage)

JYT series is a surface-mount high-voltage Multilayer Ceramic Capacitor(High Voltage)with Ni and Sn plated terminations. These MLCC capacitors can withstand higher voltage and lower leakage characteristics than typical surface mount filters.

They are smaller, thinner, lighter, and can easily be placed on a PCB.JYT series performance characteristics is designed for AC/DC waveform smoothing, Pulse power/weapons, Power Management, Industrial and so on. #Electric motors #Military power supplies #Medical pulse applications #MLCC capacitors #Multilayer capacitor

JYT - SMD Ceramic Chip Capacitor (High Voltage):
https://www.jbcapacitors.com/pdf/JYT-SMD-Ceramic-Chip-Capacitor-(High-Voltage).pdf

jb JYT series SMD Ceramic Chip Capacitors (High Voltage)

jb JYS series Surface Mount Multilayer Ceramic Chip Capacitors

jb JYS Multi- Layer Ceramic Capacitors (MLCCs) Can Cross reference TDK’ CGA series, CEU series or KEMET’SMD comm COG series. We can offer 0402,0603,0805,1206 case size multilayer ceramic capacitors (MLCCs) in NPO X7R X5R Y5V Z5U dielectrics. More detail please feel free to contact our sales by info@jbcapacitors.com.

JYS - SMD Multilayer Ceramic Chip Capacitors for related IC’s needs of the wireless/portable systems. High current and lower loss in compact size is our requirement to design such inductors. So, common applications also include High-frequency applications including mobile phones, GSM, CDMA, PDC, Portable Devices, and Bluetooth.

JYS - SMD Multilayer Ceramic Chip Capacitor:
https://www.jbcapacitors.com/Ceramic-Capacitors/JYS-SMD-Multilayer-Ceramic-Chip-Capacitor.html

jb three kinds of ceramic capacitors

jb Capacitors manufactures and markets Ceramic Capacitors, Including X1 / CD Y1 400VAC and CE Y2 300AC Safety Standard Recognized Capacitors and 1KV, 2KV, 3KV,4KV, 5KV, 6KV, 8KV, 10KV, 15KV DC High Voltage Ceramic Capacitors, Multilayer (mono) Axial & Radial Ceramic Capacitors.

JYA - X1 / Y1(CD 400VAC) and Y2(CE 300VAC) Safety Standard Recognized Capacitors
The X1 / Y class safety-certified capacitors, used in line-to-ground (line bypass) applications, have voltages from 400VAC (Y1 series)/300VAC (Y2 series) and X1 series. Major features of these non-polar capacitors include capacitance range generally from 10pF to 10000pF; from 7.5mm to10mm lead spacing, high reliability, and kinked or straight lead configurations.
jb Class X1 / Y Safety Capacitors ideal for across the line applications, compact size, cost effective product, safety standards recognized.

JYC – High Voltage Ceramic Radial Type Disc Capacitors
We designs and manufacture high quality Ultra-High Voltage Ceramic Capacitors Radial-Leaded Single Layer Disc (low loss type) Capacitors with blue coating epoxy resin, custom design radial lead disc ceramic capacitors as well as a variety of standard and custom High Voltage & High Capacitance value Ceramic Capacitors.

JYM - Multilayer (Mono) Ceramic Capacitors
Multilayer ceramic capacitors are available in a variety of physical sizes and configurations, including leaded devices and surface mounted chips. Leaded styles include molded and conformally coated parts with axial and radial leads. However, the basic capacitor element is similar for all styles. It is called a chip and consists of formulated dielectric materials which have been cast into thin layers, interspersed with metal electrodes alternately exposed on opposite edges of the laminated structure. The entire structure is fired at high temperature to produce a monolithic block which provides high capacitance values in a small physical volume. After firing, conductive terminations are applied to opposite ends of the chip to make contact with the exposed electrodes. Termination materials and methods vary depending on the intended use. Our JYM - Multilayer (Mono) Ceramic Capacitors, it can be made 25VDC and 100VDC. The leads can be bended for mounting purpose.
Above are our three kinds of Ceramic capacitors now. If you cannot find suitable products, please feel free to mail us.

We will try our best to find the substitution for you. Mail us to get more information! 

jb three kinds of ceramic capacitors

jb New Series--JYM Multilayer (Mono) Ceramic Capacitors

Do you still remember our JYM series which we introduced to you in while ago?

JYM is Multilayer (mono) Axial & Radial Ceramic Capacitors, his provide Miniature size, wide capacitance, tape and reel packaging available for auto-placement.

Wide range of applications: Such as microwave ovens in home appliances, induction cookers, air conditioner controllers, energy-saving lamp ballasts, chargers, currency counters, paper shredders, building video intercom systems, audio equipment...etc.

New series coming up with very nice price! we support few weeks. lead time and reasonable price, welcome to contact us.

jb New Series--JYM Multilayer (Mono) Ceramic Capacitors

jb Capacitors Product line expansion, JYM series (MLCC Radial, Axial)

Multilayer (mono) Axial & Radial Ceramic Capacitors

The new series of JYM, Multilayer(mono) Axial & Radial Ceramic Capacitors was launched by jb Capacitors Company. It can be used on wide application including blocking、coupling、By-passing discriminating element. For example like Booster….., store power and memory circuit.

It contains several features, Coating by epoxy resin, has excellent humidity resistance and prevents body from damaging during soldering and washing. Moreover, it is Miniature size, wide capacitance.
And, it can be supplied in both Bulk or Tape and Reel package for automatic insertion in PCB.

Below is its main parameter. Please take a look

T.C

NPO/COG

X7R(B)

Y5V(Y/F)

Z5U(E)

Dielectric type

Stable Class I Dielectric

Stable Class II Dielectric

Capacitance range

1pF~10nF

100pF~5uF

1nF~14.7uf

Operating temperature

0±30PPm/c -55~+125

±15% -55~+125

+30%~-80% -25~+85

+22%~-56% -10~+85

jb Capacitors Product line expansion, JYM series (MLCC Radial, Axial)

jb JYA - X1 / Y1(CD 400VAC) and Y2(CE 300VAC) Safety Standard Recognized Capacitors

Class X2 and Y2 are the most commonly used safety-certified capacitors. Whereas X2 and Y2 caps are appropriate for household applications, X1 and Y1 safety capacitors are used in industrial settings. Y Capacitors. Also known as "line to ground capacitors" (line bypass.) Y capacitors are used in applications where failure of the capacitor could lead to the danger of electrical shock to the user, if the ground connection is lost.

jb JYA series is specially designed for  Y1.Y2 Ceramic Capacitors, have voltages from 400VAC (Y1 series)/300VAC (Y2 series) and X1 series. 


Major features of these non-polar capacitors include capacitance range generally from 10pF to 10000pF; from 7.5mm to10mm lead spacing, high reliability, and kinked or straight lead configurations.


Typical Applications : Line disturbances suppression, Motors and motor controls, Relays, Switching power supplies, Inverters, Line-to-line (Class X) filtering, Line-to-ground (Class Y) filtering, Antenna coupling, Primary and secondary coupling, Network and security protection, audio visual product,, Home Appliance, new energy, Industry automation, LED


JYA has CE, UL certification, provide you safety and quality assurance.

Operating Temperature

-25°C~ +85°C

Capacitance Range

10pF to 10000pF

Capacitance Tolerance

±10%, ±20%, +80-20%

Rated Voltage

AC 125V, 250V, 300V, 400V

Sub-class of

CD:X1Y1 ;  CE:X1Y2

safety performance

Temperature Coefficient

2B(Y5P)±10%,  2E(Y5U)+22%~-56%, 2F(Y5V)+22%~-82%

Dissipation Factor (tan δ)

2B: 2.5% max. at 25 and 1 KHz, 1±0.2 Vrms.

Insulation Resistance at 20

2E/2F: 2.5% max. at 25 and 1 KHz, 1±0.2 Vrms.

Dielectric Strength

10000MΩat 500VDC for 1 minute.

1500V AC for 60 seconds. (250V AC)

4000V AC for 60 seconds. (400V AC)

jb Capacitors release JYM Multilayer Ceramic Capacitors Y5V, X7R, NPO

To meet market needs, we release JYM Multilayer Ceramic Capacitors recently. We have unbeatable prices and our brand “jb” is very popular on markets.
If you have needs, welcome to send us exact inquiry list for quote. 

JYM - Multilayer (Mono) Ceramic Capacitors Specifications

T.C

NPO/COG

X7R(B)

Y5V(Y/F)

Z5U(E)

Dielectric type

Stable Class I Dielectric

Stable Class II Dielectric

Capacitance range

1pF~10nF

100pF~5uF

1nF~14.7uf

Operating temperature

0±30PPm/c -55~+125

±15% -55~+125

+30%~-80% -25~+85

+22%~-56% -10~+85