jb Capacitors Offer 1000H at 85°C, Bi-polar SMD Aluminum Electrolytic Capacitor- JCN

Aluminum electrolytic capacitors consist of cathode aluminum foil, electrolytic paper, electrolyte and a layer of aluminum oxide, which acts as the dielectric, formed on anode foil surface and offers rectifying properties. When in contact with electrolyte, the oxide layer possesses an excellent forward direction insulation property. The higher the purity of the aluminum foil, the greater the dielectric strength of the aluminum electrolytic capacitor.

JCN SMD Aluminum Electrolytic Capacitors Bi-Polar/Non-Polar Electrolytic Capacitors General Purpose Electrolytic Capacitors are used for input/output smoothing circuit, excellent output filter, auxiliary power supplies circuit or phase compensation circuit. These aluminum electrolytic capacitors can be equipped with an anti-vibration base that improves anti-vibe resistance to 30G-40G.

JCN - 1000H at 85°C, Bi-polar SMD Aluminum Electrolytic Capacitor Download Datasheet View:
http://www.jbcapacitors.com/SMD-Aluminum-Electrolytic-Capacitors/JCN-1000H-at-85-Bi-polar-SMD-Aluminum-Electrolytic-Capacitor.html

jb Capacitors Offer 5000H at 105°C SMD Aluminum Electrolytic Capacitor- JCL

Our line of chip SMD Aluminum Electrolytic Capacitors is one of the most extensive offerings in the industry. jb capacitors JCE series supports, with capacitance ranges that start at 0.1uF and extend all the way up to 1500uF,.wide temperature range from -55°C to +105 °C, load life of 3000-5000 H and comply with the RoHS directive. Surface mount aluminum electrolytic capacitors do not have leads.  These parts come on tape and reel and can be mounted and soldered on a PCBA at very high speeds.

We provide a variety of styles including V-chip HVC Aluminum Electrolytic Capacitors, SMD type (Vertical) HVS Aluminum Electrolytic Capacitors, V-chip HVG Aluminum Electrolytic Capacitors, V-chip HVF Aluminum Electrolytic Capacitors, SMD type (Vertical) HVM Aluminum Electrolytic Capacitors, V-chip HVX Aluminum Electrolytic Capacitors, each customizable with features like extended life, low leakage, high temperature and Low ESR allowing jb to provide solutions for every design.

JCL - 5000H at 105°C SMD Aluminum Electrolytic Capacitor Download Datasheet View:
http://www.jbcapacitors.com/SMD-Aluminum-Electrolytic-Capacitors/JCL-5000H-at-105-SMD-Aluminum-Electrolytic-Capacitor.html

jb Capacitors SMD ECaps with ISO Certificate

You may read lots of article of our SMD Ecaps. We have wide series of SMD Ecaps products with different features.

JCS - 2000H at 85°C SMD Aluminum Electrolytic Capacitor
JCK - 1000H to 2000H at 105°C SMD Aluminum Electrolytic Capacitor
JCC - 2000H at 85°C, Low Leakage SMD Aluminum Electrolytic Capacitor
JCD - 2000H at 105°C, Low Impedance SMD Aluminum Electrolytic Capacitor
JCE - 3000H at 105°C, Long Life Assurance SMD Aluminum Electrolytic Capacitor
JCL - 5000H at 105°C SMD Aluminum Electrolytic Capacitor
JCN - 1000H at 85°C, Bi-polar SMD Aluminum Electrolytic Capacitor
JCB - 2000H at 105°C, Bi-polar SMD Aluminum Electrolytic Capacitor
JCZ - 3000H at 105°C, Extra Lower Impedance SMD Aluminum Electrolytic Capacitor
JCV - 3000H at 105°C, Long Life Assurance SMD Aluminum Electrolytic Capacitor
JCA - 6000H at 105°C, Long Life Assurance SMD Aluminum Electrolytic Capacitor
JCW - 10000H at 105°C, Long Life Assurance SMD Aluminum Electrolytic Capacitor
JCH - 1000H to 5000H at 125°C, Long Life Assurance SMD Aluminum Electrolytic Capacitor

We provide SMD Ecaps with competitive price and awesome quality.

They can be the best replacement of Samwha, Yageo, Elna, Nichicon, Chemi-con, Rubycon, Panasonic and Epcos.

If you are using the brand that I mentioned, could you please let me know your regular using items?

I may offer our best substitution with the best price for you!

Mail us your demand and get some free samples!

jb Capacitors Offer 2000H at 105°C, Low Impedance SMD Aluminum Electrolytic Capacitor- JCD

jb Capacitor 's surface mount aluminum electrolytic capacitors are available in a variety of configurations including low profile vertical chip, low impedance, high operating temperature, high ripple current and low ESR versions. SMD type reflow soldering is available and a large capacitance range is up to 4700uF , series code JCD, is one of the important representative series in Ecap, which are required aluminum electrolytic capacitors for professional photo flash units and a wide range of automotive applications.

Specifications:
Capacitance Range: 1uF-4700uF
Capacitance Tolerance: ±20% at 120Hz, 20°C
Specific Models are as follows:
1uF 50V 4*5.4mm
2.2uF 50V 4*5.4mm
4.7uF 50V 5*5.4mm
10uF 16V 4*5.4mm
10uF 25V 5*5.4mm
22uF 16V 5*5.4mm
22uF 25V 6.3*5.4mm
47uF 25V 6.3*7.7mm
47uF 16V 6.3*5.4mm
100uF 10V 6.3*7.7mm
100uF 16V 6.3*7.7mm
220uF 10V 6.3*7.7mm
220uF 16V 8*10.5mm

JCD - 2000H at 105°C, Low Impedance SMD Aluminum Electrolytic Capacitor Download Datasheet View:
http://www.jbcapacitors.com/SMD-Aluminum-Electrolytic-Capacitors/JCD-2000H-at-105-Low-Impedance-SMD-Aluminum-Electrolytic-Capacitor.html
 

jb Capacitors Offer 2000H at 85°C, Low Leakage SMD Aluminum Electrolytic Capacitor- JCC

jb Capacitors Company, China electrolytic capacitor manufacturer offer you SMD Aluminum Electrolytic Capacitor in which 85°C, 2000h Low Leakage current (0.5~3.3μA max.), AEC-Q200 compliant. Vibration-proof product is available upon request (08 mm and larger). This series named JCC capacitors, using electronics Chip, low cost for replacement of some tantalum applications.

The various applications for V-chip type JCC series SMD aluminum electrolytic capacitors are in frequency converters, flat-panel displays, solar inverters, professional power supplies and UPS, medical applications. At the same time jb E-cap possesses very long-term reliability and outstanding ripple current capabilities. Design flexibility allows jb Capacitors Company to offer custom specific solutions.

JCC - 2000H at 85°C, Low Leakage SMD Aluminum Electrolytic Capacitor Download Datasheet View:
http://www.jbcapacitors.com/SMD-Aluminum-Electrolytic-Capacitors/JCC-2000H-at-85-Low-Leakage-SMD-Aluminum-Electrolytic-Capacitor.html

jb Capacitors Offer 1000H to 2000H at 105°C SMD Aluminum Electrolytic Capacitor- JCK

SMD Chip-type capacitors are soldered using a reflow method. JCK series aluminum electrolytic capacitor , operating with wide temperature range -40~+105°C is designed for surface mounting on high density circuit board in which shape to help them easier to mount to substrates subjected to the reflow method. JCK chips E-cap have achieved a capacitor with low ESR and high ripple current resistance. Now we printed the “jb” logo in the surface of JCK series aluminum electrolytic capacitor to make a difference with old one

Typical applications for JCK series aluminum electrolytic capacitors include PC motherboards, game consoles, wind power converters, and electronic car components. Especially Electronic car component applications, they have shown remarkable growth in recent years, and this will be our focus as we look at the latest trends in chip-type aluminum electrolytic capacitors. All thanks to technology, wish our capacitors improvement will come to you satisfaction.

JCK-1000H to 2000H at 105°C SMD Aluminum Electrolytic Capacitor  Download Datasheet View:
http://www.jbcapacitors.com/SMD-Aluminum-Electrolytic-Capacitors/JCK-1000H-to-2000H-at-105-SMD-Aluminum-Electrolytic-Capacitor.html

jb Capacitors Show You What is 2000H at 85°C SMD Aluminum Electrolytic Capacitor-JCS

What is surface mount Aluminum Electrolytic Capacitor? Aluminum Electrolytic Capacitor has relatively high equivalent series resistance (ESR), which means that they generate high heat for a given current level. Aluminum Electrolytic Capacitor is low cost, have a high capacitance value and high energy density value. Energy density determines the amount of energy that may be stored in a given volume.

Aluminum Electrolytic Capacitor are polarized types with limited frequency response whose anode electrode (+) are made from a high-purity aluminum foil with an aluminum oxide thin film dielectric on its surface. SMD style electrolytic capacitors with non-solid electrolyte (vertical-chips, V-chips) have a colored filled half circle or a minus bar on the top case side visible to indicate the minus terminal side. Additionally, the insulating plate under the capacitor body uses two skewed edges to indicate that the negative terminal is on the complement position.

With V-chip type, jb JCS series capacitor are shaped to make them easier to mount to substrates subjected to the reflow method. Emboss carrier tape packing system is available for automatic insertion. Operating temperature from -40°C to +85°C, Capacitance range 0.1ufF~10000 uF are available. Leakage current (Φ4~Φ10) ≤0.01CV or 3μA, whichever is greater (after 2 minutes application of rated voltage).Leakage current (Φ12.5~Φ16) ≤0.03CV or 4μA, whichever is greater (after 1 minutes application of rated voltage)

JCS - 2000H at 85°C SMD Aluminum Electrolytic Capacitor Download Datasheet View:
http://www.jbcapacitors.com/SMD-Aluminum-Electrolytic-Capacitors/JCS-2000H-at-85-SMD-Aluminum-Electrolytic-Capacitor.html

jb Capacitors SMD Aluminum Electrolytic Capacitors

SMD surface mount capacitors are widely used on circuit boards, they are small and leadless.  Jb capacitors have high volume manufacture- quantities used are numbered in the billions.  We provides competitive price and short lead time with the best quality and the best service for you.

Surface mount technology offers significant advantages for the mass production of electronic equipment.  Compare to traditional components possessed leads like axial and radial type, SMD replace them with contacts that can be mounted directly onto PCB enabling easy soldering.

Advantage of SMD capacitors:
 Easier to place on manufacture: Instead of having leads they have metallized connections at either end.
 Small size: no wired leads are required means that different construction techniques can be used and this allows for much smaller components to be made.
 Lower spurious inductance: the levels of spurious inductance are much smaller, and these capacitors are much nearer the ideal component that their leaded relations.
 Lower cost:   Not only can these components be used more easily in production reducing the production costs of the final product

Jb capacitors manufacture wide value and working voltage:
 JCS - 2000H at 85°C SMD Aluminum Electrolytic Capacitor
 JCK - 1000H to 2000H at 105°C SMD Aluminum Electrolytic Capacitor
 JCC - 2000H at 85°C, Low Leakage SMD Aluminum Electrolytic Capacitor
 JCD - 2000H at 105°C, Low Impedance SMD Aluminum Electrolytic Capacitor
 JCE - 3000H at 105°C, Long Life Assurance SMD Aluminum Electrolytic Capacitor
 JCL - 5000H at 105°C SMD Aluminum Electrolytic Capacitor
 JCN - 1000H at 85°C, Bi-polar SMD Aluminum Electrolytic Capacitor
 JCB - 2000H at 105°C, Bi-polar SMD Aluminum Electrolytic Capacitor
 JCZ - 3000H at 105°C, Extra Lower Impedance SMD Aluminum Electrolytic Capacitor
 JCV - 3000H at 105°C, Long Life Assurance SMD Aluminum Electrolytic Capacitor
 JCA - 6000H at 105°C, Long Life Assurance SMD Aluminum Electrolytic Capacitor
 JCW - 10000H at 105°C, Long Life Assurance SMD Aluminum Electrolytic Capacitor
 JCH - 1000H to 5000H at 125°C, Long Life Assurance SMD Aluminum Electrolytic Capacitor

jb Capacitors Axial Ecaps with Favorable Price and Nice Quality

jb not only produce normal Radial Aluminum Electrolytic Capacitors, we also provide AXIAL type Aluminum Electrolytic Capacitors.

We always provide capacitors with competitive price and awesome quality.

Would you like to let me know your AXIAL Ecaps demand? So I can prepare our samples for you to test.

Let you have more choice and comparison.

Click below title to know more specification. Send us your inquiry.
JAA - 2000H at 85°C, Axial Aluminum Electrolytic Capacitors (Low Leakage)
JAB - 2000H at 85°C, Axial Aluminum Electrolytic Capacitors Standard Low Voltage
JAH - 1000H at 105°C, Axial Aluminum Electrolytic Capacitors Standard Low Voltage

JAC - 1000H 105°C, DF at Max 4% BP Axial Aluminum Electrolytic Capacitors for Audio System
JAD - 1000H 105°C, DF at Max 5% BP Axial Aluminum Electrolytic Capacitors for Audio System
JAE - 1000H 105°C, DF at Max 10% BP Axial Aluminum Electrolytic Capacitors for Audio System
JAF - 1000H 105°C, DF at Max 10% BP Axial Aluminum Electrolytic Capacitors for Audio System

jb Tell You More About Polymer Aluminum Solid Capacitors

Conductive polymer aluminum solid capacitors, which is also called “polymer capacitors”. The polymer capacitors as well as conventional aluminum electrolytic capacitors are featured by large capacitance and excellent bias characteristics which multilayer ceramic capacitors can never compete with.

In addition to these advantages that Aluminum electrolytic capacitors have as well, the polymer capacitors have extremely low ESR characteristics.
Regarding ESL, which it is determined by inside structure and terminal configuration of the capacitors, by making structural improvements the polymer capacitors have low ESL compared with the conventional aluminum electrolytic capacitors.

Also, the polymer capacitors have realized very high reliability and superior low temperature characteristics by using solid polymer materials as an electrolyte. The polymer capacitors having these features have been demonstrating their capabilities in various fields.

jb Conductive Polymer Aluminum Solid Electrolytic Capacitors are widely used in various applications, which applicable to DC/DC converters and AC/DC converters, communication power supply, set-top boxes, router, TV, voltage regulator, mobile phone adapter (mobile phone charger), computer motherboard, graphics card, power supplies, CPU’s, Decoupling circuits and LCD Monitors.
JB PSS and PSR series are most popular series in current market. 

If you are interested, welcome to contact our sales department for more information, thank you.

PSS - 2000H at 105°C Standard Radial Polymer Aluminum Solid Electrolytic Capacitors
PSR - 2000H at 105°C Low ESR Radial Polymer Aluminum Solid Electrolytic Capacitors