jb JVA - Zinc Oxide Varistors

We design and manufacture high quality Zinc Oxide Varistors Series.  A varistor is an electronic component with an electrical resistance that varies with the applied voltage.
Varistors currently have widespread application in protecting power and signal level electrical circuits against dangerous voltage surges.
Zinc oxide varistors are electronic ceramic materials whose electrical behavior is dominated by grain-boundary interface states.

They exhibit a highly nonlinear current-voltage relation with a 5% change in voltage serving to increase the current flow an order of magnitude or more.

If you need this products, please mail us freely. We will be glad to offer you the price information and the most suitable products for you.

jb JVA - Zinc Oxide Varistors

jb Summary of Capacitor Types

The table below gives and overview of the main characteristics of the various types of capacitor.

Capacitor types Capacitance range Accuracy Temperature stability Leakage Comments
Electrolytic 0.1 µF - ~1 F V poor V poor Poor Polarised capacitor - widely used in power supplies for smoothing, and bypass where accuracy, etc is not required.
Ceramic 10 pF - 1 µF Variable Variable Average Exact performanceof capacitor depends to a large extent on the ceramic used.
Tantalum 0.1 µF - 500 µF Poor Poor Poor Polarised capacitor - very high capacitance density.
Silver mica 1 pF - 3000 pF Good Good Good Rather expensive and large - not widely used these days except when small value accurate capacitors are needed.
Polyester (Mylar) 0.001 µF - 50 µF Good Poor Good Inexpensive, and popular for non-demanding applications.
Polystyrene 10 pF - 1 µF V good Good V good High quality, often used in filters and the like where accuracy is needed.
Polycarbonate 100 pF - 20 µF V good V good Good Used in many high tolerance and hash environmental conditions. Supply now restricted.
Polypropylene 100pF - 50 µF V good Good V good High performance and low dielectric absorption.
Teflon 100 pF - 1 µF V good V v good V v good High performance - lowest dielectric absorption.
Glass 10 pF - 1000 pF Good Good V good Excellent for very harsh environments while offering good stability. Very expensive.
Porcelain 100 pF - 0.1 µF Good Good Good Good long term stability
Vacuum and air 1 pF - 10 000 pF       Often used as variable capacitors in transmitters as a result of their very high voltage capability.

Welcome to visit our jb capacitors website http://www.jbcapacitors.com/ to search your interestedcapacitors.