jb SMD Aluminum Electrolytic Capacitor with Tape and Reel Package

Dear jb Customer,

jb capacitors are ISO manufacturer for full kinds of MKT, MKP film capacitors and standard SMD electrolytic capacitors.
 
Our SMD aluminum electrolytic capacitor are widely used in Set-top box, Amplifier and Telecommunication products like GPRS, Automobile etc.
 
Can replace of Nichicon UWX, UWT series, Rubycon SEV, SKV series, Panasonic EEE-x(A)S, EEEHA series, Sanyo CE-BS, CE-FS, Yaego CA, CB series etc.
 
We enjoy very good reputation on global markets, below you can see photo for our SMD E-Cap package.

JCS-- SMD aluminum electrolytic capacitor, 85C
JCK-- SMD aluminum electrolytic capacitor, 105C

 
Kind remind: Our sales will work as usual during Chinese spring festival, welcome to send us your inquiries or orders.

SMD E-caps Tape&Reel package.

jb SMD Aluminum Electrolytic Capacitors Cross Reference.

jb Capacitors Company produce high quality SMD Electrolytic Capacitors.
Below SMD electrolytic capacitors replace Panasonic, Nichicon Rubycon and Samwha. Pls. send your inquiry or part numbers to info@jbcapacitors.com
 

SMD /CHIP Aluminum Electrolytic Capacitors, General Purpose
Specification          
Maximum temperature Endurance jb capacitors Nippon Nichicon Rubycon  
85 2000h. JCS MVA UWX SEV  
105 1000h~2000h JCK MVE UWT SKV  
Maximum temperature Endurance jb capacitors Panasonic Sanyo Samwha Yageo
85 2000h. JCS EEE-x(A)S CE-BS SC CA
105 1000h~2000h JCK EEEHA CE-FS RC CB

 

jb Standard SMD Aluminum Electrolytic Capacitor

Keywords: SMD Aluminum, Electrolytic capacitor, Chip Electrolytic Capacitors, Surface Mount Electrolytic Capacitors Nichicon, Panasonic, Rubycon, Panasoic ,capacitor, MKT MKP etc..

jb capacitors company strongly recommend SMD standard type Aluminum electrolytic capacitors.

Our factory not only professional at MKT MKP Film capacitors, but also professional at manufacturing SMD aluminum electrolytic capacitors. We focus on standard type, can offfer many equivalents of big brands, such as Nichicon, Rubycon, Panasonic, Epcos, Arcotronics(Kemet), Sanyo etc...

We produce standard JCS & JCK, I.E. 2000hours at 85C' & 1000hours at 105C', see below our photo and size, welcome you send us inquiry.

case size(DxL):4x5.4~5.8mm, 5x5.4~5.8mm, 6.3x5.4~5.8mm, 6.3x7.7mm, 8x10.5mm, 10x10.5mm

jb Aluminum Electrolytic Capacitor Recommended conditions

For reflow, use thermal conduction systems such as infrared radiation (IR) or hot blast. Vapor heat transfer systems (VPS) are not recommended.

Observe proper soldering conditions (temperature, time, etc.).

Do not exceed the specified limits.

Temperature measuring method: Measure temperature in assuming quantitative production, by sticking the thermo-couple to the capacitor upper part with epoxy adhesives.

Consult us for additional reflow restrictions.

jb SMD Aluminum Electrolytic Capacitor

Aluminum electrolytic capacitors have a bi-polar structure. This is marked on the body of the capacitor. A capacitor must not be mounted with reversed polarity. The application of an AC or reverse voltage may cause a short circuit or damage the capacitor. Bi-polar capacitors must not be used in AC applications, where the polarity may be reversed in the circuits or is unknown.

jb SMD Aluminum Electrolytic Capacitor Product List

JCS - 2000H at 85°C SMD Aluminum Electrolytic Capacitor
JCK - 1000H at 105°C SMD Aluminum Electrolytic Capacitor

SMD aluminum electrolytic capacitors, jb Capacitors provides the most common series: 2000h at 85°C SMD aluminum electrolytic capacitors and 1000h at 105°C SMD aluminum electrolytic capacitors. jb Capacitors sell very competitive prices and our monthly output for SMD aluminum electrolytic capacitors can reach 30 millions units.

jb SMD Aluminum Electrolytic Capacitor --JCS - 2000H at 85°C

jb Capacitors manufactures and markets SMD Aluminum Electrolytic Capacitor. 2000 hours at 85°C Chip Aluminum Electrolytic Capacitor is one of the most common series. We sell quite good prices, high quality and with short lead time.

Load Life:After 2000 hours application of rated voltage at 85℃, capacitors meet the characteristics

Capacitance Change Within ± 20% of initial value (Within ± 25% of initial value for 4V)
Dissipation Factor 200% or less of initial specified value
Leakage Current Initial specified value or less

jb SMD Aluminum Electrolytic Capacitors description

jb Capacitors manufactures and sells SMD Aluminum Electrolytic Capacitors. We are strong in the most two common series: 2000H at 85℃ SMD Aluminum Electrolytic Capacitors and 1000H at 105℃ SMD Aluminum Electrolytic Capacitors. Our SMD aluminum electrolytic capacitors prices are almost the best in China!

JCS - 2000H at 85℃ SMD Aluminum Electrolytic Capacitor Designed for surface mounting on high density circuit board.

Emboss carrier tape packing system is available for automatic insertion.

JCK - 1000H at 105℃ SMD Aluminum Electrolytic Capacitor

Chip type, operating with wide temperature range -40~+105℃.

Designed for surface mounting on high density circuit board.

Emboss carrier tape packing system is available for automatic insertion.

jb offer short lead time SMD Electrolytic Capacitors

Do you current to urgent need SMD electrolytic Capacitors? Find us jb, jb can solve you this problems.

Voltage Range: 4V ~ 100V.DC
Capacitance Range: 0.1 ~ 470μF, Tolerance +/-20% at 120Hz, 20°C
Load life: 1000H at 105°C, 2000H at +85°C
Size (DXL): 4x5.4mm, 5x5.4mm, 6.3x5.4mm, 6.3x7.7mm, 8x6.2mm.
Lead time: 2-3 weeks

SMD Electrolytic capacitors of jb Capacitors

Electrolytic capacitors are now being used increasingly in SMD designs. Their very high levels of capacitance combined with their low cost make them particularly useful in many areas.

Often SMD electrolytic capacitors are marked with the value and working voltage. There are two basic methods used. One is to include their value in microfarads (m F), and another is to use a code. Using the first method a marking of 33 6V would indicate a 33 mF capacitor with a working voltage of 6 volts. An alternative code system employs a letter followed by three figures. The letter indicates the working voltage as defined in the table below and the three figures indicate the capacitance on picofarads. As with many other marking systems the first two figures give the significant figures and the third, the multiplier. In this case a marking of G106 would indicate a working voltage of 4 volts and a capacitance of 10 times 10^6 picofarads. This works out to be 10 mF.

Letter Voltage
e 2.5
G 4
J 6.3
A 10
C 16
D 20
E 25
V 35
H 50

jbcapacitorsis thespecialty manufacturer of the SMD Electrolytic capacitor.Ourjb capacitorshave JCS - 2000H at 85°C SMD Aluminum Electrolytic Capacitor and JCK - 1000H at 105°C SMD Aluminum Electrolytic Capacitor.

JCK - 1000H at 105°C SMD Aluminum Electrolytic Capacitor
JCK

JCS - 2000H at 85°C SMD Aluminum Electrolytic Capacitor
JCS

jb SMD Electrolytic Capacitors Cross Reference

JB Aluminum Electrolytic Capacitors/SMD type and Chip type Cross Reference
Specification jb
capacitors
Nippon
Chemi-con
Nichicon Rubycon Panasonic Sanyo Elna Epcos Arcotronics
(kemet)
Maximum temperature Endurance
85C 2000hr. JCS MV UWX SEV EEE-x(A)S BSS RV3 B41112 EDK
UWR
105C 1000hr. JCK MKA ZT SKV EEEHA FSS RVS B41141 EDE
WT