JB Capacitors Company produce 2 series axial lead film capacitors, JFG & JFX

JFG series mainly used for loudspeakers,amplifier & power supply while JFX used for high-end audio products, JFX has equivalent quality with many famous brand audio capacitors, such as V-cap, Jensen, Auricap, Erse. We have very good price, high quality,fast shipment & excellent service.

  • JFG - Metallized Polyester & Polypropylene Film Capacitor - Axial Lead, Round & Flat oval type.
  • JFX - Premium Metallized Polypropylene Film Capacitor - Axial Lead

JCS - 2000H at 85°C SMD Aluminum Electrolytic Capacitor

jb Capacitors manufactures and markets SMD Aluminum Electrolytic Capacitor. 2000 hours at 85°C Chip Aluminum Electrolytic Capacitor is one of the most common series. We sell quite good prices, high quality and with short lead time. Following are 85°C SMD Aluminum Electrolytic Capacitor features, specifications and drawing.

JCS - 2000H at 85°C SMD Aluminum Electrolytic Capacitor Features

  • Designed for surface mounting on high density circuit board.
  • Emboss carrier tape packing system is available for automatic insertion.

JCS - 2000H at 85°C SMD Aluminum Electrolytic Capacitor Parameters download PDF files

JCS - 2000H at 85°C SMD Aluminum Electrolytic Capacitor Specifications

Operating Temperature -40°C~ +85°C JCS - 2000H at 85°C SMD Aluminum Electrolytic Capacitor
Voltage Range 4V ~ 100V.DC
Capacitance Range 0.1 ~ 470μF
Capacitance Tolerance ±20% at 120Hz, 20°C
Leakage Current Leakage current (Φ4~Φ8x6.2) ≤0.01CV or 3μA, whichever is greater.
(after 2 minutes application of rated voltage)

JCS - 2000H at 85°C SMD Aluminum Electrolytic Capacitor Drawing

 

JSW - Lug Aluminum Electrolytic Capacitor, for Motor Starting

jb Capacitors manufactures and markets Lug Aluminum Electrolytic Capacitor, for Motor Starting, which widely used for the compressor starter of a refrigerator and air-conditioner and for the water pumps. Following are Lug Aluminum Electrolytic Capacitor features, specifications and dimensions.

JSW - Lug Aluminum Electrolytic Capacitor (for Motor Starting) Features

  • Load life of 75000 times and 30000 times
  • For motor starting
  • Used for the compressor starter of a refrigerator and air-conditioner and for the water pumps

JSW - Lug Aluminum Electrolytic Capacitor (for Motor Starting) Parameters download PDF files

JSW - Lug Aluminum Electrolytic Capacitor (for Motor Starting) Specifications

Items Performance Characteristics JSW - Lug Aluminum Electrolytic Capacitor (for Motor Starting)
Operating Temperature Range (°C) -20°C~+70°C
Rated Voltage 110~330V,AC
Capacitance Tolerance (25°C,120Hz) 0%~20%
Power Factor (25°C,60Hz) 8% MAX
Over-Voltage Test Applied 1.2 time rated voltage for 2 minutes or .4 time rated voltage for 30 seconds
Load Life (+85°C) 125 W.V: Apply for one second and rest for 29 seconds, two time per minute at +7°C after 75000 times Power factor:
20% or less. Capacitance change: within 25% of initial measured value.
160W.V: Apply for one second and rest for 59 seconds, one time per minute at +70°C after 30000 times. Power
factor: 20% or less. Capacitance change: within 25% of initial measured value.
Withstanding Voltage Withstand 1500V,AC(r.m.s) for one minute between both terminals and the case holding clamp

JSW - Lug Aluminum Electrolytic Capacitor (for Motor Starting) Dimensions

 

jb Mylar Polyester Film Capacitor - JFA

jb Capacitors produce Mylar Polyester Film Capacitor with very competitive prices. Mylar capacitor is available in high voltage 1000V and 1200V, also high temperature 105° C and 125°C. Mylar Polyester Capacitor is widely used in lighting and lamps. Following are Mylar Polyester Film Capacitor features, specifications and drawing.

JFA - Mylar Polyester Film Capacitor Features

  • Inductive welded construction epoxy dip coated.
  • Good reputation in use with consumer & industrial electronics.
  • Optimum for automatic insertion due to their small size and light weight.
  • Coated with epoxy resin for superior heat resistance, humidity resistance and solvent resistance.

JFA - Mylar Polyester Film Capacitor Parameters download PDF files

JFA - Mylar Polyester Film Capacitor Specifications

Operating Temperature -40°C~ +85°C JFA - Mylar Polyester Film Capacitor
Rated Voltage 100V, 250V, 400V, 630V, 1000V.DC
Capacitance Range 0.001 ~ 0.47μF
Capacitance Tolerance ±5%, ±10%, ±20%
Insulation Resistance 0.1μF ≤30,000MΩ min, >0.1μF >15000MΩ
Dissipation Factor ≤0.1 (at 1KHz)
Dielectric Strength 200% of rated voltage for 5 sec.

JFA - Mylar Polyester Film Capacitor Drawing

About jb Capacitors

Specialized in manufacturing full series of Plastic Film Capacitors & Snap-in, Screw & Lug type Aluminum Electrolytic Capacitors. These products have been widely using in consumer's electronics, data processing, telecommunication, and industrial control's equipments. It is our commitment to offer our customers the best quality products with fast delivery and the best after sales services.

jb Capacitors has been producing film capacitors since 1980. We offer all kinds of film capacitors, polyester, polypropylene, polystyrene, epoxy dipped type, box type, X2, X1 class, high voltage film capacitors up to 2000VDC, besides winding technology and stacked technology are both available. Our film capacitors are famous for high quality, short lead time and very competitive prices.

jb Capacitors produces many kinds of motor starting capacitors, with high safety, high reliability, low dissipation factor and low temperature rise.

jb Capacitors has 30 years production experience on large can (snap in, screw, and lug type) aluminum electrolytic capacitors. We sell top quality with reasonable prices. Our SMD aluminum electrolytic capacitors 105'C and 85'C lead time is very short and prices are the best in the market. Monthly output for SMD electrolytic capacitors can meet 30 millions.
Learn more:http://www.jbcapacitors.com/

jb Capacitors History

  • Jun, 1980, founded in Tainan, Taiwan to produce Plastic Film Capacitors.
  • Feb, 1982, started to produce Snap-in, Screw & Lug type Aluminum Electrolytic Capacitors.
  • Dec, 1984, established sales office and warehouse in Hong Kong Located in N.T., HK
  • July, 1987, moved to China and built up joint venture in Hefei, Anhui Province, China.
  • Dec, 1988, started production of Snap-in, Screw & Lug Aluminum Electrolytic Capacitors in China.
  • Aug, 1993, jb Capacitors became sole proprietorship enterprise in China.
  • Jun, 2003, jb Capacitors set up sales office in Dongguan, Guangdong Province, China.
  • March, 2005, started to produce SMD Aluminum Capacitors.
    Learn more:http://www.jbcapacitors.com/

 

jb Capacitors Strong Products

 

Why do You Choose jb Capacitors

  1. High quality commitment
  2. Competitive prices, professional factory
  3. Fast lead time
  4. Strong sales & technical support, quick response
  5. Promotions by exhibitions, B2B, Newsletter
    Learn more:http://www.jbcapacitors.com/