2017-2-27 22:32:58
views
The main properties are Non-polar, high insulation resistance, excellent frequency characteristic (broad frequency response), and the dielectric loss is very small.
Based on the above advantages, film capacitors are widely used in analog circuit.
Especially in signal coupling part, you must use good frequency characteristic and low dielectric loss of capacitor, to ensure that the signal transmission, when does not have the too big distortion occurs.
Among all of plastic film capacitors, the most significant is polypropylene (PP) and polystyrene (PS) characteristics of the capacitance.
Film capacitors' manufacturing method usually is the aluminum foil, as the electrode and the plastic film after overlapping winding together.
But film capacitors have another manufacturing method, called Metallized film (Metallized Film), the method is in plastic film in vacuum evaporation of a very thin layer of metal as electrode.
So you can save the thickness of the electrode foil, reducing the size of the capacitor unit volume.
It is easy to make film capacitors small, it can make large capacity also.
From jb Capacitors Company sales department
2016-11-17 1:49:32
views
jb Capacitors manufactures and markets Plastic Film Capacitors. Here are our hot sell Plastic Film Capacitors products with enough stock and competitive price for your reference.
JFA - Mylar Polyester Film Capacitor
JFB - Metallized Polyester Film Capacitor (Top Seller)
JFC - Metallized Polyester Film Capacitor (VAC)
JFG - Axial Metallized Polyester & Polypropylene Film Capacitor
JFL - Metallized Polypropylene Film Capacitor
JFP - High Voltage Metallized Polypropylene Film Capacitor
Any needs, please feel free to advise, we will do our best for you. Welcome your RFQ here!
Check our full products list, please see:
http://www.jbcapacitors.com/Plastic-Film-Capacitors/
2010-4-9 19:3:11
views
jb Capacitors produce Mylar Polyester Film Capacitor with very competitive prices. Mylar capacitor is available in high voltage 1000V and 1200V, also high temperature 105° C and 125°C. Mylar Polyester Capacitor is widely used in lighting and lamps. Following are Mylar Polyester Film Capacitor features, specifications and drawing.
JFA - Mylar Polyester Film Capacitor Features
- Inductive welded construction epoxy dip coated.
- Good reputation in use with consumer & industrial electronics.
- Optimum for automatic insertion due to their small size and light weight.
- Coated with epoxy resin for superior heat resistance, humidity resistance and solvent resistance.
JFA - Mylar Polyester Film Capacitor Parameters download PDF files
JFA - Mylar Polyester Film Capacitor Specifications
Operating Temperature | -40°C~ +85°C | |
Rated Voltage | 100V, 250V, 400V, 630V, 1000V.DC |
Capacitance Range | 0.001 ~ 0.47μF |
Capacitance Tolerance | ±5%, ±10%, ±20% |
Insulation Resistance | 0.1μF ≤30,000MΩ min, >0.1μF >15000MΩ |
Dissipation Factor | ≤0.1 (at 1KHz) |
Dielectric Strength | 200% of rated voltage for 5 sec. |
JFA - Mylar Polyester Film Capacitor Drawing