2013-8-19 9:42:16
views
jb capacitors company is ISO 9001:2008 manufacturer, produce top quality photo flash Electrolytic
capacitors. For details, pls check below:
JSU - Photo Flash, Lug Aluminum Electrolytic Capacitor
Features:
Lug terminals
For Photo Flash
High Stability
Compact and light weight
Datasheet: http://www.jbcapacitors.com/pdf/JSU-Photo-Flash-Lug-Aluminum-Electrolytic-Capacitor.pdf
Most popular values:
1600uF 360V -10%~+20% DXL: 35X70mm Bulk RoHS
1600uF 400V -10%~+20% DXL: 34.75X69mm Bulk RoHS
2011-5-2 22:48:36
views
jb Aluminum Electrolytic Capacitor - JNE
Features
- Load life of 2000 hours at 105°C
- High ripple current
- Smaller size
- PCB Mounting
Construction
- Charge/discharge-proof, polar
- Aluminum case, fully insulated with PVC
- Version with PET insulation available
- Version with additional PET insulation cap on terminal side
- available for insulating the capacitor from the PCB
- Snap-in solder pins to hold component in place on PC-board
- Minus pole marking on case surface
- Minus pole not insulated from case
- Overload protection by safety vent on the base
2010-4-9 19:3:11
views
jb Capacitors produce Mylar Polyester Film Capacitor with very competitive prices. Mylar capacitor is available in high voltage 1000V and 1200V, also high temperature 105° C and 125°C. Mylar Polyester Capacitor is widely used in lighting and lamps. Following are Mylar Polyester Film Capacitor features, specifications and drawing.
JFA - Mylar Polyester Film Capacitor Features
- Inductive welded construction epoxy dip coated.
- Good reputation in use with consumer & industrial electronics.
- Optimum for automatic insertion due to their small size and light weight.
- Coated with epoxy resin for superior heat resistance, humidity resistance and solvent resistance.
JFA - Mylar Polyester Film Capacitor Parameters download PDF files
JFA - Mylar Polyester Film Capacitor Specifications
| Operating Temperature | -40°C~ +85°C |  |
| Rated Voltage | 100V, 250V, 400V, 630V, 1000V.DC |
| Capacitance Range | 0.001 ~ 0.47μF |
| Capacitance Tolerance | ±5%, ±10%, ±20% |
| Insulation Resistance | 0.1μF ≤30,000MΩ min, >0.1μF >15000MΩ |
| Dissipation Factor | ≤0.1 (at 1KHz) |
| Dielectric Strength | 200% of rated voltage for 5 sec. |
JFA - Mylar Polyester Film Capacitor Drawing
