jb Folien-Kondensatoren & Aluminum-Elektrolyt-Kondensatoren

jb Capacitors Company ist ein professioneller Hersteller von Folien-und Aluminium-Elektrolyt-Kondensatoren seit 1980. Wir verkaufen zu sehr günstigen Preisen Top-Qualität aus China.

Wir arbeiten jetzt weltweit mit Bauelemente-Distributoren und Herstellern zusammen. Diese liefern Lautsprecher, Netzteile, Geräte der Meß-und Regeltechnik, Leiterplatten, Energie-Spar-Lampen, Entladungslampen, Verstärker, Schweißmaschinen, Audio-Komponenten, Sicherheitsbeleuchtung, etc...

Unsere Hauptprodukte haben wir nachstehend aufgelistet:

  • Folien-Kondensatoren: Polyester, Polypropylen, Polystyren Folien-Kondensatoren.
  • Aluminum-Elektrolyt-Kondensatoren: SMD, Snap-In, Schraub-und Lötanschluss-Aluminum-Elektrolyt-Kondensatoren

 

jb SMD Electrolytic Capacitors Cross Reference

JB Aluminum Electrolytic Capacitors/SMD type and Chip type Cross Reference
Specification jb
capacitors
Nippon
Chemi-con
Nichicon Rubycon Panasonic Sanyo Elna Epcos Arcotronics
(kemet)
Maximum temperature Endurance
85C 2000hr. JCS MV UWX SEV EEE-x(A)S BSS RV3 B41112 EDK
UWR
105C 1000hr. JCK MKA ZT SKV EEEHA FSS RVS B41141 EDE
WT

 

jb Feature Film Capacitor

薄膜电容器(MKT,MKP,CL11,CL21,Interference Suppression Film Capacitor)具有很多优良的特性,是一种性能优秀的电容器, 它的主要等性如下:

无极性,绝缘阻抗很高,频率特性优异(频率响应宽广),而且介质损失很小。基于以上的优点, 所以薄膜电容器(MKT,MKP,CL11,CL21,Interference Suppression Film Capacitor)被大量使用在模拟电路上。尤其是在信号交连的部份,必须使用频率特性良好,介质损失极低的电容器,方能确保信号在传送时,不致有太大的失真情形发生。

在所有的塑料薄膜电容(MKT,MKP,CL11,CL21,Interference Suppression Film Capacitor)当中,又以聚丙烯电容(MKP,Interference Suppression Film Capacitor)和聚苯乙烯电容(Polystyrene Capacitor)的特性
最为显著。通常的薄膜电容器(MKT,MKP,CL11,CL21,Interference Suppression Film Capacitor)其制法是将铝等金属箔当成电极和塑料薄膜重迭后卷绕在一起制成。但是薄膜电容器(MKT,MKP,CL11,CL21,Interference Suppression Film Capacitor)又有一种制造法,叫做金属化薄膜(Metallized Film),其制法是在塑料薄膜(Plastic Film)上以真空蒸镀上一层很薄的金属以做为电极。

如此可以省去电极箔的厚度,缩小电容器单位容量的体积,所以薄膜电容器(MKT,MKP,CL11,CL21,Interference Suppression Film Capacitor)较容易做成小型,容量大的电容器.

JFA--Mylar polyester film capacitors   
http://www.jbcapacitors.com/Plastic-Film-Capacitors/JFA-Mylar-Polyester-Film-Capacitor.html
JFB--Metallized polyester film capacitors  
http://www.jbcapacitors.com/Plastic-Film-Capacitors/JFB-Metallized-Polyester-Film-Capacitor.html
JFK - Polypropylene Film Capacitor   
http://www.jbcapacitors.com/Plastic-Film-Capacitors/JFK-Polypropylene-Film-Capacitor.html
JFL--Metallized polypropylene film capacitors   
http://www.jbcapacitors.com/Plastic-Film-Capacitors/JFL-Metallized-Polypropylene-Film-Capacitor.html
JFG--Axial lead film capacitor   
http://www.jbcapacitors.com/Plastic-Film-Capacitors/JFG-Axial-Metallized-Polyester-Polypropylene-Film-Capacitor.html
JFV--X2 275VAC met polypropylene film capacitors  
http://www.jbcapacitors.com/Plastic-Film-Capacitors/JFV-X2-Metallized-Polypropylene-Film-Capacitor.html
JFZ--X2 310VAC met polypropylene film capacitors   
http://www.jbcapacitors.com/Plastic-Film-Capacitors/JFZ-X2-Metallized-Polypropylene-Film-Capacitor.html
JFM - Box Type Metallized Polypropylene Film Capacitor   
http://www.jbcapacitors.com/Plastic-Film-Capacitors/JFM-Box-Type-Metallized-Polypropylene-Film-Capacitor.html
JFP--High voltage metallized polypropylene cap   
http://www.jbcapacitors.com/Plastic-Film-Capacitors/JFP-High-Voltage-Metallized-Polypropylene-Film-Capacitor.html
JFQ--High voltage metallized polypropylene cap   
http://www.jbcapacitors.com/Plastic-Film-Capacitors/JFQ-High-Voltage-Box-Type-Metallized-Polypropylene-Film-Capacitor.html
JFR - Radial & Axial Polystyrene Film Capacitor   
http://www.jbcapacitors.com/Plastic-Film-Capacitors/JFR-Radial-Axial-Polystyrene-Film-Capacitor.html
JFS--Motor Running capacitors   
http://www.jbcapacitors.com/Plastic-Film-Capacitors/JFS-Motor-Capacitor.html
JFT - Metallized Polypropylene Film AC Capacitor Class-X1   
http://www.jbcapacitors.com/Plastic-Film-Capacitors/JFT-Metallized-Polypropylene-Film-AC-Capacitor-Class-X1.html
JFX--Premium metallized polypropylene Cap   
http://www.jbcapacitors.com/Plastic-Film-Capacitors/JFX-Premium-Metallized-Polypropylene-Film-Capacitors-Axial.html
JSX--Superior metallized polypropylene Cap   
http://www.jbcapacitors.com/Plastic-Film-Capacitors/JSX-Superior-Metallized-Polypropylene-Film-Capacitors-Axial.html
JFYE - Box Type Met Polypropylene Film Capacitor For Power Meter   
http://www.jbcapacitors.com/pdf/JFYE-Box-Type-Met-Polypropylene-Film-Capacitor-For-Power-Meter.pdf  

jb X2 Film Capacitors Lastest News

Arcotronics Kemet, Epcos,Pilkor, EVOX RIFA, Panasonic lead time is very very long, one customer told me this morning Arcotronics Kemet R46 X2 need 371days, that is 53 weeks, over 1 year....

But JB X2 lead time is only 5-7 weeks, for common value like 0.1uF even can meet 4-5 weeks.

Jb Capacitors produce MKT, MKP, X2 film capacitors and electrolytic capacitors. We have cross for above mentioned brands, we produce and sell under jb capacitors brand.

Currently for X2, below is most popular items we sell, widely used for Power supply, lighting products, and power meters, how about you ?

  • X2--0.022uF 275VAC P:15mm
  • X2--0.1uF 275VAC P:10mm
  • X2--0.1uF 275VAC P:15mm
  • X2--0.33uF 275VAC P:15mm
  • X2--0.47uF 275VAC P:15mm &22.5mm
  • X2--0.68uF 275VAC P:15mm & 22.5mm

jb Aluminum Electrolytic Capacitors Use Instructions

Aluminum electrolytic capacitors may cause an explosion, fire, or other serious trouble if not used under specified operating conditions. Please familiarize yourself with the instructions given below before using these capacitors Operating temperature and ripple current.

  • 1. Keep the operating temperature and ripple current in specified ranges. Applying an excessive current to a capacitor will overheat it, resulting perhaps in short-circuit, ignition, or other fatal fault.
  • 2. A capacitor is also a heating component itself. Please be on guard, remembering that it heats up the inside of the equipment. Run the unit under normal conditions and check the temperature of the surroundings of the capacitor.
  • 3. The permissible ripple current tends to decline with a rise in the atmosphere temperature (the temperature of the surroundings of the capacitor). Consider a permissible ripple current at the maximum predictable atmospheric temperature. Allow also for the changes in frequency.

Applied voltage and connections

  • 1. Capacitors have polarity. Applying a reverse voltage or AC voltage to a capacitor may cause a fire or other fatal fault.
  • 2. Use a bipolar capacitor for circuits whose polarity reverses. However, in this case, like any other case,refrain from using such a capacitor in AC circuit.
  • 3. When an AC component is superimposed on a DC voltage, prevent the peak value from exceeding the rated voltage. An excessive voltage may cause a short-circuit, fire, or other fatal fault.
  • 4. When connecting more than one capacitor in parallel, consider the resistance of the wiring. Establish the connections so that the wiring resistance will be equal at every capacitor.
  • 5. When more than one capacitor is connected in series, all capacitors must be of identical ratings. Then connect the balancing resistors in parallel. At that time, design the circuit so that the voltage levels applied to all capacitors become equal.Check that the voltages applied to capacitors do not exceed a rated voltage.
  • 6. Do not use such a capacitor for a circuit that is repeatedly charged and discharged quickly. If you are to use such a capacitor for a welding unit or for other charging and discharging purposes, use a capacitor designed on a separate basis.
  • 7. Even slow recharging may shorten the service life of a capacitor if its voltage changes greatly. Check it sufficiently as installed on a larger machine or consult Capsun.

Capacitor insulation

  • 1. Do not connect the blank terminal (reinforcing terminal) of a multi-terminal (three- or four-terminal) product of the snap-in type to another circuit. It may cause a short circuit.
  • 2. The external sleeve of the snap-in type has no insulator. If you need a sleeve with an insulator, consult Capsun.
  • 3. Ensure a completely open circuit between the case and the cathode terminal, and between the anode terminal and circuit pattern

Operating conditions

  • 1. A splash of water, salty water, oil or other electrically conductive liquid on a capacitor or using a capacitor when it has dew on it may cause a breakdown. Oil on the rubber sealing or safety vent may cause a decline in airtightness. Do not use a capacitor with liquid on it.
  • 2. Do not use or leave a capacitor in a place where there is a hydrogen sulfide, nitrous acid, sulfurous acid, chlorine, bromine, or other halide compound gas, ammonia, or other hazardous gas. The ingress of any of the aforementioned gases into a capacitor may corrode it. Avoid fumigating and spraying an insecticide as well.
  • 3. Do not use or leave a capacitor in a place exposed to ozone, ultraviolet ray, or radiation.
  • 4. Do not use a capacitor in a place where vibration or impact is excessive.

Installa tion Before installaton

  • 1. Do not reverse the polarity. Do not use a capacitor to which a reverse voltage is applied, even if it looks problem-free. It must be greatly damaged.
  • 2. Do not tighten the curled part (case sealed part) with a mounting fitting or otherwise stress it. Any such practice may cause a liquid leak or sleeve breakage.
  • 3. Dropping or otherwise impacting a capacitor may result in a decline in its electric performance,causing a breakdown. Therefore do not cause an impact on it.
  • 4. Do not reuse a capacitor which has been installed on a machine and energized. No capacitor can be reused except for those removed to measure their electric performance for a periodic checkup.

Method of installation

  • 1. Do not make the safety vent (cap side) of a screw terminal type face downwards. The safety vent may let the electrolyte or compound leak.
  • 2. Do not install a wiring or circuit pattern near the safety vent. When the safety vent is activated, the electrolyte may jet out, resulting in a fire or other secondary accident.
  • 3. Avoid installing a heating part around a capacitor or in back of a printed wiring board (beneath the capacitor).
  • 4. Do not hamper the activation of the safety vent. Above the safety vent (where a screw terminal type is installed on the terminal side, or snap-in type on the case bottom), allow for the following clearances.

 

jb Capacitors Company X2 Safety Capacitor Stock Notice

jb capacitors produce MKT, MKP, X2 safety metallized polypropylene capacitors since 1980.

We are going to stock some X2 capacitors, and provide better delivery support to you. Do you have interest ?

Could you please send us the X2 capacitors requirements ? Then we will keep stock for you. You are welcome to request samples and quotation from us too.

Datasheet link : http://www.jbcapacitors.com/pdf/JFO-X2-Metallized-Polypropylene-Film-Capacitor-(4-approvals).pdf

I need below information, please help reply me:

  • 1) Description or Part number of X2 film capacitors (can give Arcotronics, Epcos, Panasonic....X2 capacitors part number)
  • 2) Quantity per shipment, per month or per year.
  • 3) Order frequency

jb Capacitors Company Definition

Capacitor is an electromechanical device capable of storing electrical energy (electrons). It differs from a battery, as a battery produces electrical energy as a by-product of chemical activity. A capacitor can function in a circuit like a battery. Or a resistor, or an inductor, for that matter. It can also absorb energy, turning some into heat.

A farad of capacitance is a lot of capacitance. In high voltage, we generally deal in microfarads (mfd.) or picofarads (pf) which are one millionth of a farad and one millionth of 1 millionth of a farad, respectively. Infrequently used, a nanofarad is one thousandth of a microfarad.
Learn more:http://www.jbcapacitors.com/