jb Best Seller ---- JFV X2 Film Capacitors

jb capacitors is old factory since 1980. manufacturing the film capacitors, SMD & Large Can Electrolytic capacitors.

To make you know more about our products,  pls visit our website: www.jbcapacitors.com

We have the best support on high quality, good prices and 4-6 weeks lead time for X2 film capacitors. 

Welcome to visit  Electronica 2012,   jb Booth No.: B6.437/5,     13-16 November ,2012,   Munich, Germany.

jb Capacitors Company X2 film capacitors Cross Reference

JFV X2 Description (RoHS*)
275VAC & 305VAC
Epcos B32921~B32924
305VAC
Epcos B81130  275VAC
2200pF 275VAC +/-10% P:10mm      
3300pF 275VAC +/-10% P:10mm      
4700pF 275VAC +/-10% P:10mm      
6800pF 275VAC +/-10% P:10mm      
0.01uF 275VAC +/-10% P:10mm   B32921C3103 B81130-C1103
0.015uF 275VAC +/-10% P:10mm     B81130-C1153
0.022uF 275VAC +/-10% P:10mm   B32921C3223 B81130-C1223
0.033uF 275VAC +/-10% P:10mm   B32921C3333 B81130-C, B81130-A1333
0.047uF 275VAC +/-10% P:10mm   B32921C3473 B81130-C1473
0.068uF 275VAC +/-10% P:10mm   B32921C3683  
0.1uF 275VAC +/-10% P:10mm   B32921C3104  
0.01uF 275VAC +/-10% P:15mm      
0.022uF 275VAC +/-10% P:15mm     B81130-B1223
0.047uF 275VAC +/-10% P:15mm   B32922C3473 B81130-B1473
0.068uF 275VAC +/-10% P:15mm   B32922C3683 B81130-C1683
0.1uF 275VAC +/-10% P:15mm   B32922C3104 B81130-C1104, B81130-A1104
0.15uF 275VAC +/-10% P:15mm   B32922C3154 B81130-C1154
0.22uF 275VAC +/-10% P:15mm   B32922C3224 B81130-C1224
0.33uF 275VAC +/-10% P:15mm   B32922C3334  
0.47uF 275VAC +/-10% P:15mm   B32922C3474  
0.15uF 275VAC +/-10% P:22.5mm     B81130-B1154
0.22uF 275VAC +/-10% P:22.5mm   B32923C3224 B81130-B1224
0.33uF 275VAC +/-10% P:22.5mm   B32923C3334 B81130-C1334
0.47uF 275VAC +/-10% P:22.5mm   B32923C3474 B81130-C1474, B81130-A1474
0.56uF 275VAC +/-10% P:22.5mm      
0.68uF 275VAC +/-10% P:22.5mm   B32923C3684 B81130-C1684
1uF 275VAC +/-10% P:22.5mm   B32923C3105  
0.47uF 275VAC +/-10% P:27.5mm     B81130-B1474
0.68uF 275VAC +/-10% P:27.5mm   B32924C3684 B81130-B1684
1uF 275VAC +/-10% P:27.5mm   B32924C3105 B81130-C1105, B81130-A1105
1.5uF 275VAC +/-10% P:27.5mm   B32924C3155 B81130-C1155, B81130-A1155
2.2uF 275VAC +/-10% P:27.5mm   B32924C3225 B81130-C1225, B81130-A1225

jb SMD Aluminum Electrolytic Capacitors Cross Reference.

jb Capacitors Company produce high quality SMD Electrolytic Capacitors.
Below SMD electrolytic capacitors replace Panasonic, Nichicon Rubycon and Samwha. Pls. send your inquiry or part numbers to info@jbcapacitors.com
 

SMD /CHIP Aluminum Electrolytic Capacitors, General Purpose
Specification          
Maximum temperature Endurance jb capacitors Nippon Nichicon Rubycon  
85℃ 2000h. JCS MVA UWX SEV  
105℃ 1000h~2000h JCK MVE UWT SKV  
Maximum temperature Endurance jb capacitors Panasonic Sanyo Samwha Yageo
85℃ 2000h. JCS EEE-x(A)S CE-BS SC CA
105℃ 1000h~2000h JCK EEEHA CE-FS RC CB

 

jb What is The Difference Between Polyester, Polypropylene?

Polyester films, are clearer and a higher quality than lower grade films, which tend to be foggy. Premium films also endure extreme environments and severe stress conditions more favorably. Films with higher polyester content are more rigid and feel thicker than films with more adhesive content.

Polypropylene film is softer than polyester, but still has excellent clarity. These films have strong chemical resistence, good color stability over printed sheets, and good elasticity which allows the film to lay extremely flat. Due to its softness and flatness, polypropylene films are most often used in single-sided laminating.

jb告诉你什么是安规电容,主要作用是什么?

安规电容是指用于这样的场合:即电容器失效后,不会导致电击,不危及人身安全.它包括了X电容和Y电容。

X电容是跨接在电力线两线 (L-N) 之间的电容,一般选用金属化薄膜电容;Y电容是分别跨接在电力线两线和地之间 (L-E, N-E) 的电容,一般是成对出现。

基于漏电流的限制,Y电容值不能太大,一般X电容是uF级,Y电容是nF级。X电容抑制差模干扰,Y电容抑制共模干扰。

安规电容安全等级  

应用中允许的峰值脉冲电压 

过电压等级 (IEC664)

X1

>2.5kV ≤4.0kV

Ⅲ

X2

≤2.5kV

Ⅱ

X3

≤1.2kV

——

  

 

 

安规电容安全等级

绝缘类型

额定电压范围

Y1

双重绝缘或加强绝缘

≥ 250V

Y2

基本绝缘或附加绝缘

≥150V ≤250V

Y3

 基本绝缘或附加绝缘

≥150V ≤250V

Y4

基本绝缘或附加绝缘

<150V

Y电容的电容量必须受到限制,从而达到控制在额定频率及额定电压作用下,流过它的漏电流的大小和对系统EMC性能影响的目的。

GJB151规定Y电容的容量应不大于0.1uF。Y电容除符合相应的电网电压耐压外,还要求这种电容器在电气和机械性能方面有足够的安全余量,避免在极端恶劣环境条件下出现击穿短路现象,

Y电容的耐压性能对保护人身安全具有重要意义。

jb Plastic Film Capacitor—Dielectric Types

Film Capacitors are Non polarized, and may be used in AC or DC circuits.
Typical values range form 1000pF to 1uF for Polyerster Film, and 0.01uF to 18uF for Metallized Film capacitors. Standard Film Capacitor values change in multiples of 10, 12, 15, 18, 22, 27, 33, 39, 47, 56, 68, 82.

Normal Temperature Coefficient [TC] for Film Capacitors is +7%.

  • Mylar: has a wide temperature change of 20% over -55 to +125°C. Moisture absorption is half that of paper.
    Mylar is the same as polyester. The term Mylar is a trade name.
  • Polycarbonate: Out performs Mylar in all areas. Low Power factor, works best with AC. Polycarbonate has a low temperature drift (graph below), dissipation factor, and dielectric absorption. Use polyphenylene sulfide as a possible replacement.
  • Polyester: Replaces paper for many applications, and smaller in size. Polyester does not have the moisture problem that paper does, but does have a worse tolerance, at 20% ~ over -55 to +125°C. May also be called PETE, or PETP. The Polyester Dielectric has an Absorption of around 0.20%.
  • Polypropylene: It has negative temperature coefficient.
  • Polysulfone: Has a very high operating temperature of +170°C.
  • Polystyrene: Will only work to +65°C. It has a flat to negative temperature coefficient.
  • Teflon: Has a very high operating temperature of +170°C.

jb Told You Capacitors Case Types - Feed Through

Round Feed Through capacitors, in a skin tight plastic wrap with solderable ends (Style Q). The hole in the center of the capacitor is either a Teflon Tube, Paper Tube or Phenolic Tube ranging in sizes from just a wire to a large threaded stud to fit through. The majority of Feed Throughs are custom made to exact customer requirements. They are very popular in filter applications.

Half-life of a Capacitor

Symbol:T
Unit:(s)
When a capacitor discharges its charge throught a resistor, the charge of the capacitor decreases with time. The decreasing charge follows an exponential decay curve.

http://www.jbcapacitors.com/

jb Capacitors Company Exhibit in 2010 Electronics Asia HK Fair

Our jb capacitors company exhibit in 2010 ElectronicsAsia HK show, many customers visited our green booth , our three sales girls who were wearing green jackets , stand in the green booth and welcome all the customers all over the world.

jbcapacitors

jbcapacitors

jbcapacitors

jbcapacitors

During the meeting, we display below our strong series samples, green bags, green leaflets and sample kits to customers , and they check our quality and send us their inquires. All of us enjoy the wonderful moment in the HK fair.

  • JFA--Mylar polyester film capacitor
  • JFB--Metallized polyester film capacitor
  • JFD--Box metallized polyester film capacitors
  • JFG--Axial polyester&polypropylene film capacitors
  • JFL--Metallized polypropylene film capacitor
  • JFO--X2 metallized polypropylene film capacitor
  • JFN--X2 Metallized polypropylene film capacitors
  • JFP--High voltage metallized polypropylene film capacitor
  • JFX--Preminum metallized polypropylene film capacitors, for high-end audio products
  • JCS,JCK--Standard SMD Aluminum Electrolytic capacitors
  • Snap in terminals, Screw terminals and lug terminals for photo flash Aluminum Electrolytic capacitors

Our jb capacitors company sincerely hope to work with all the customers in the world. And we will exhibit in HK fair every year, welcome you visit our booth in 2011.

Next month on November 9th~12th, JB capacitors company will exhibit Electronica 2010 in Munich, Germany. Welcome to visit our booth No. B6.437/10

电容降压工作原理简介

电容降压的工作原理并不复杂。他的工作原理是利用电容在一定的交流信号频率下产生的容抗来限制最大工作电流。

例如,在50Hz的工频条件下,一个1uF的电容所产生的容抗约为3180欧姆。当220V的交流电压加在电容器的两端,则流过电容的最大电流约为70mA。虽然流过电容的电流有70mA,但在电容器上并不产生功耗,因为如果电容是一个理想电容,则流过电容的电流为虚部电流,它所作的功为无功功率。

根据这个特点,我们如果在一个1uF的电容器上再串联一个阻性元件,则阻性元件两端所得到的电压和它所产生的功耗完全取决于这个阻性元件的特性。例如,我们将一个110V/8W的灯泡与一个1uF的电容串联,在接到220V/50Hz的交流电压上,灯泡被点亮,发出正常的亮度而不会被烧毁。因为110V/8W的灯泡所需的电流为8W/110V=72mA,它与1uF电容所产生的限流特性相吻合。同理,我们也可以将5W/65V的灯泡与1uF电容串联接到220V/50Hz的交流电上,灯泡同样会被点亮,而不会被烧毁。因为5W/65V的灯泡的工作电流也约为70mA。

因此,电容降压实际上是利用容抗限流。而电容器实际上起到一个限制电流和动态分配电容器和负载两端电压的角色。

采用电容降压时应注意以下几点:

  • 1.根据负载的电流大小和交流电的工作频率选取适当的电容,而不是依据负载的电压和功率。
  • 2.限流电容必须采用无极性电容,绝对不能采用电解电容。而且电容的耐压须在400V以上。最理想的电容为铁壳油浸电容。
  • 3.电容降压不能用于大功率条件,因为不安全。
  • 4.电容降压不适合动态负载条件。
  • 5.同样,电容降压不适合容性和感性负载。
  • 6.当需要直流工作时,尽量采用半波整流。不建议采用桥式整流。而且要满足恒定负载的条件。

以上是电容降压工作原理的简单介绍。其实电阻、电容和电感作为电子电路的基本元件,熟知它们的特性并灵活地应用它们是非常重要的。