2020-9-8 10:24:2
views
To meet the demands of the market, we launched two series of SMD capacitors. One is JCT, the other one is JCX. Both series can be used on general application.
It can be used on the board with space economic. If you have demands in small size SMD Aluminum Electrolytic capacitors, you can try this for your electronic board.
Also, they have different load life range. JCX has wider load life range from 2000H to 5000H. JCT has 2000H to 3000H. Both series has almost the same features, the biggest difference is their load life.
JCT - 2000H to 3000H at 105°C, Small Size SMD Aluminum Electrolytic Capacitor
JCX - 2000H to 5000H at 105°C, Small Size SMD Aluminum Electrolytic Capacitor
| Operating Temperature | -55°C~ +105°C |
| Voltage Range | 6.3V ~ 50V.DC |
| Capacitance Range | 10 ~ 2200μF |
| Capacitance Tolerance | ±20% at 120Hz, 20°C |
| Leakage Current | The greater value of either 0.01CV or 3μAr μA/after 2minutes (max) |
2012-5-25 13:41:47
views
jb Capacitors Company produce high quality SMD Electrolytic Capacitors.
Below SMD electrolytic capacitors replace Panasonic, Nichicon Rubycon and Samwha. Pls. send your inquiry or part numbers to info@jbcapacitors.com
| SMD /CHIP Aluminum Electrolytic Capacitors, General Purpose |
| Specification | | | | | |
| Maximum temperature | Endurance | jb capacitors | Nippon | Nichicon | Rubycon | |
| 85℃ | 2000h. | JCS | MVA | UWX | SEV | |
| 105℃ | 1000h~2000h | JCK | MVE | UWT | SKV | |
| Maximum temperature | Endurance | jb capacitors | Panasonic | Sanyo | Samwha | Yageo |
| 85℃ | 2000h. | JCS | EEE-x(A)S | CE-BS | SC | CA |
| 105℃ | 1000h~2000h | JCK | EEEHA | CE-FS | RC | CB |
2012-3-30 13:57:14
views
SMD e-cap, also called Chip E-caps, means Surface mount aluminum electrolytic capacitors. This type of capacitor are very easy to mount. jb capacitors company recommend the two most common series to you, one is JCS smd e-cap with 2000hrs at 85C, another is JCK e-cap at 105C, both 105C and 85C are available. Pls. visit our website www.jbcapacitors.com and contact us for more detail information.
2010-12-23 19:15:41
views
Passive SMDs: There is quite a variety of different packages used for passive SMDs. However the majority of passive SMDs are either resistors or capacitors for which the package sizes are reasonably standardized. Other components including coils, crystals and others tend to have more individual requirements and hence their own packages.
Resistor and capacitor packages have a variety of packages. These have designations that include: 1812, 1206, 0805, 0603, 0402, and 0201. The figures refer to the dimensions in hundreds of an inch. In other words the 1206 measures 12 hundreds by 6 hundreds of an inch. The larger sizes such as 1812 and 1206 were some of the first that were used. They are not in widespread use now as much smaller components are generally required. However they may find use in applications where larger powers are needed or where other considerations require the larger size.
The connections to the printed circuit board are made through metallised areas at either end of the package.http://www.jbcapacitors.com/
